Cannon-instrument TESC Manual do Utilizador descarregar pdf (Página 21)

CANNON®

TESC Operator's Manual, Rev 1.0

Running an ASTM D2983 Test

This procedure runs sample conditioning programs and viscosity tests designed to meet

ASTM method D2983.

Table 8 — Tools and materials required

Description

Assembled TESC System with mounted

Brookfield® DV2T viscometer

20 mL sample to be tested

25 mm × 150 mm rimless, disposable test

tube

Brookfield® #4B2 insulated spindle

Sample preparation materials

RS-485 to USB cable

USB flash drive with program files

1. Turn on DV2T and TESC. If the Watlow® controller starts to run a program, press the red

EZ button to halt the test. (Steps symbol indicates a running program.)

Note: For instructions on installing the Watlow® EZ-Zone Configurator

program, refer to page 20.

2. Load the appropriate thermal conditioning program into Watlow® controller:

a. Connect PC to Watlow® controller using RS-485 to USB cable.

b. Launch Watlow® configurator program: Start Menu > EZ-ZONE Configurator > EZ-

ZONE Configurator.

c. Select Download a configuration file to a device. Click Next.

d. Select the COM port to which the Watlow® controller is connected. Click Next.

e. Select Load Program from File.

f. Select program:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Sem comentários

Cannon-instrument TESC Manual do Utilizador Página 21